info@gescosteel.com
Hardox 500 are also known as Wear Plates which are designed to last longer than standard mild steel. The most common hardness levels in the category are 400 and 500. The combination of hardness, strength and toughness makes it stand up to extreme wear. This can replace expensive wear products like high chrome white iron and hard-faced overlay plates. Even though it is too tough, it can be cut, welded, milled and drilled using standard workshop practices.
Hardox 500 is not planned for further every heat treatment. It has gotten its mechanical properties by extinguishing and when fundamental by method for ensuing treating. The properties of the conveyance condition can't be held after introduction to temperatures in abundance of 250 C. Fitting well being and security insurances must be taken when welding, cutting, crushing or generally dealing with this item.
Crushing, particularly of first stage covered plates, may create dust with a high molecule focus.
Our extent is resistant to abrasion and is utilized as a part of different applications that oblige higher wear resistance. Also, these are utilized as a part of cradle receptacles, grizzly bars, measuring containers and skips, crushers, strainers, feeders, measuring pockets, skips, bleeding edges, transports, cans, blades, apparatuses, and sprockets.
HARDOX 500 Steel Plates Chemical Properties
Plate | C | Si | Mn | P | S | Cr | Ni | Mo | B | CEV | CET |
thickness mm | max % | max % | max % | max % | max % | max % | max % | max % | max % | typv | typv |
04/13/13 | 0.27 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 0.25 | 0.25 | 0.004 | 0.49 | 0.34 |
(13)-32 | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 0.5 | 0.3 | 0.004 | 0.62 | 0.41 |
(32)-40 | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 1 | 0.6 | 0.004 | 0.64 | 0.43 |
(40)-80 | 0.3 | 0.7 | 1.6 | 0.025 | 0.01 | 1.5 | 1.5 | 0.6 | 0.004 | 0.74 |