The bendable, weldable and highly abrasion-resistant steel.
Hardox 500 is a bendable and weldable abrasion-resistant steel, with a nominal hardness of 500 HBW. Suitable for applications that demand higher wear resistance.
Hardox 500 increases payload and increases service life while maintaining good processability and toughness.
Hardox 500 plate Grade and Specification
Item | Abrasion Resistant Plate |
Material | HARDOX 500 ,HARDOX 400 ,HARDOX 450 ,HARDOX 600 ,SUMIHARD ,NICRODUR ,BRINAR ,DUROSTAT ,DILLIDUR ,JFE EVERHARD |
Thickness | 3-200mm |
Width | 500-3000mm |
Length | 1000-12000mm |
Heat Treatment | N, Q+T |
Surface Paint | EP, PE, HDP, SMP, PVDF |
Export to | Saudi arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa,South America,Brazil, India, Australia, Egypt |
Chemical Properties Of Hardox 500 Plate
HARDOX 500 Chemical Compositiom | |||||||||||
Plate | C | Si | Mn | P | S | Cr | Ni | Mo | B | CEV | CET |
thickness mm | max % | max % | max % | max % | max % | max % | max % | max % | max % | typv | typv |
4-13 | 0.27 | 0.7 | 1.6 | 0.025 | 0.01 | 1.00 | 0.25 | 0.25 | 0.004 | 0.49 | 0.34 |
(13)-32 | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1.00 | 0.50 | 0.30 | 0.004 | 0.62 | 0.41 |
(32)-40 | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1.00 | 1.00 | 0.60 | 0.004 | 0.64 | 0.43 |
(40)-80 | 0.30 | 0.7 | 1.6 | 0.025 | 0.01 | 1.50 | 1.50 | 0.60 | 0.004 | 0.74 | 0.46 |
Plate thickness below 4 mm only after special agreement
CEV = C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15
CET = C + (Mn+Mo)/10+( Cr+ Cu)/20+ Ni/40
Mechanical Properties Of Hardox 500 Plate
Mechanical properties of HARDOX 500 | |||||
Grade | Mechanical Property | Charpy V Impact Test | |||
HADOX 500 | HBW Thickness/Mpa | Elongation | Degree | longitudinal | |
4-32MM | 470-530 | Min % | -40 | J | |
(32)-80 | 450-540 | 10 | 40 |