info@gescosteel.com
The HARDOX 500 Plates is an abrasion resistant plate with a hardness of 500 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. These are available in various specification & thickness as per the requirements of clients. These steel plates are the widely used of the wear resistant grades. We make all the sizes and thickness of Hardox 500 Plates as per the clients requirements.
Chemical Composition
Plate | C | Si | Mn | P | S | Cr | Ni | Mo | B | CEV | CET |
thickness mm | max % | max % | max % | max % | max % | max % | max % | max % | max % | typv | typv |
04/13/13 | 0.27 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 0.25 | 0.25 | 0.004 | 0.49 | 0.34 |
(13)-32 | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 0.5 | 0.3 | 0.004 | 0.62 | 0.41 |
(32)-40 | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 1 | 0.6 | 0.004 | 0.64 | 0.43 |
(40)-80 | 0.3 | 0.7 | 1.6 | 0.025 | 0.01 | 1.5 | 1.5 | 0.6 | 0.004 | 0.74 |
Mechanical Property
Grade | Mechanical Property | Charpy V Impact Test | |||
HADOX 500 | HBW Thickness/Mpa | Elongation | Degree | longitudinal | |
4-32MM | 470-530 | Min % | -40 | J | |
(32)-80 | 450-540 | 10 | 40 | ||